Tuesday, August 20, 2013

Sorting and Reading the Bones

I finally got all of my Bones unpacked.  As you can see, there are a heap of minis on the desk (the Chronoscope and modern minis are not pictured except for those that can be used for my Legends of the Old West campaign. I will probably sell the rest).  With my particular package, I received well over two hundred Bones miniatures ranging in size from tiny rats to dragons and giants.  For the most part, I am pleased with the outcome. 


As I said... for the most part. Unfortunately, many of the miniatures will need a bit of repair before they can be used.  A full third of the minis are bent in some form or another.  Weapons, arms, legs...the issues are many and varied.  Yes, I know that all it takes is a dip in boiling water then another in cold water to remedy the problem (I used to do that with my Axis and Allies War at Sea ships) but this is an additional step in the preparation process and one that I was not expecting (at least not on this scale).  Removing mold lines and flash, washing, and assembly - basically the entire prepping process, already ranks incredibly low on the ol' excitement meter.  This additional layer of no-fun really puts a damper on my purchase.

Perhaps my experience is not the norm and other shipments arrived in better condition.  And maybe the process of repairing nearly eighty miniatures will go much easier/quicker than I think.  So just maybe I'm writing a rather harsh review.  As it stands now however, I do not think I will be purchasing any more Bones miniatures unless I can actually see the product in the package and ensure the integrity of the model.  Living on an island and having a fifty-five mile one-way trip to the nearest hobby shop (that may or may not carry the mini I want) means that the likelihood of me acquiring more Bones will be quite small.

Despite my disappointment, I will let stand my initial review of the Kobold Bones back in March of 2012.  The integrity of those miniatures were spot on and I had no problems with bending.  What the difference between the two shipments is I do not know.  Bad luck?  Different material?  Poor packing?  Whatever the reason, my Reaper Bones Kickstarter Reward was not as I hoped and certainly not up to the standards of the original batches for sale.  Granted, the math says that I still received a great deal on so many models.  But time is money as they say and spending extra time repairing mistakes from Reaper lessens the overall value to the customer.

For those of you who took part in the Bones Kickstarter, what has been your experience?  In what condition did your miniatures arrive?  Are you generally pleased with the outcome or do you have issues as well?  Your thoughts and comments are always welcome.

Thanks for reading...

6 comments:

  1. The packaging of the vampire packs had a very negative outcome in terms of all the bent minis. I also think that the quality of some of the minis is not up to snuff but only about 10 are really bad. I know that Reaper is not releasing 5 of them to retail but they were included in the kickstarter as promised.

    The bones minis are best in the large than man sized models where the loss of detail is not as noticable and the cost savings is quite good.

    ReplyDelete
    Replies
    1. Thanks for the comments. I have to agree with you on the price. Even with the issues, Reaper Bones are a great deal...especially for wargaming projects and for role playing games.

      In a way, it's comforting to know I wasn't the only one with bent miniatures. On the other hand, the fact that others are experiencing the same problem confirms my fears.

      Thanks for reading!

      Delete
  2. I have only looked at a few blisters of in shops but I'm not fond of plastic material either especially when its been described as bendy in other reviews. Like you say its another step to in the prepping stage.

    Perhaps you should have a fixing session once a week and repair say 10 miniatures you'll have them done in no time then. Shame your disappointed I think with the long wait from a lot of these kickstarters it can be a bit deflating when the is something wrong with the final product.

    ReplyDelete
    Replies
    1. That's a great idea Simon. Repairing a few at a time would make the process less daunting. For some reason I had it in my head that I would find myself standing over boiling water for hours working on a bunch of plastic miniatures. Ten a week is very manageable.

      Thanks for reading!

      Delete
  3. The bent figures issue is restricted almost entirely to the Vampire shipment, and the way it was packed. None of the bones I've bought before I got my shipment needed to be straightened.

    I also agree with Simon, do the bending in batches. It works especially well if you then immediately wash them to finish removing any leftover demolder.

    ReplyDelete
    Replies
    1. That's good news indeed David. As I mentioned, I was very happy with my Kobolds when the line was first announced. I'm glad to hear that the bending issue is associated with the Kickstarter packaging only.

      Thanks for reading!

      Delete